Variable Frequency Drives | Anaheim Automation, Inc.
Information
Anaheim Automation carries a broad line of rugged AC Variable Frequency Drives (VFDs) for OEM and Industrial applications, combining high performance and cost efficiency in one powerful package. Available in input voltages of 120V and 240V, and capable of powering AC motors from 0.25 to 30HP, these VFDs are great for normal duty and soft-start operation applications. Our VFDs are ideal for fan, pump, and HVAC applications, providing energy savings and increased system efficiency. They are equipped with a number of advantageous features including momentary power loss restarts, flying starts, auto-acceleration/deceleration, and sensorless vector control. These features allow for flexibility across a wide range of applications.
Note: Shop our selection of AC Motors for a compatible unit to complete your system. Contact our Customer Service Representatives to discuss your project and get help with makin a selection. Click Here for assistance in determining whether your application falls under Light, Normal, or Heavy Duty.
Input Voltage: 120VAC or 240VAC
Max Power: 0.25 to 30.00 HP
Standard Equipped with Modbus and RS485 Communication
V/F Control and Open-Loop Vector Control
Built-in PID Control
Auto Torque Boost & Auto Slip Compensation Function
Ideal for Fan, Pump, and HVAC Applications
Improves Variable Torque Efficiency and Constant Horsepower Load Applications
Featured Series
KNC-VFD-CV100-1S
Input Voltage Range: Single-Phase, 100-120V
Rated Power: 200-1100 Watts (0.25-1.5 HP)
Great for normal duty and soft-start operation
Control Mode: V/F control; Open-loop vector control
Auto torque boost and auto slip compensation function
Built-in PID control
Standard Equipped Modbus (RS485 baud rate up to 125000bps)
Sleep/wake up function
KNC-VFD-CV100-2S
Input Voltage Range: Single-Phase, 200-240V
Rated Power: 200-400 Watts (0.25-0.5 HP)
Great for normal duty and soft-start operation
Control Mode: V/F control; Open-loop vector control
Carrier frequency up to 15KHz
Auto torque boost and auto slip compensation function
Built-in PID control
Modbus Communication (RS485 baud rate up to 38400bps)
Sleep/wake up function
KNC-VFD-CV20-1S
Input Voltage Range: Single-Phase, 100-120V
Rated Power: 200 - 750 Watts (0.25 - 1 HP)
Great for normal duty and soft-start operation
Control Mode: V/F control; Open-loop vector control
Auto torque boost and auto slip compensation function
Built-in PID control
Modbus Communication (RS485 baud rate up to 4800 - 19200bps)
Sleep/wake up function
KNC-VFD-CV20-2S
Input Voltage Range: Single-Phase, 200-240V
Rated Power: 400-1500 Watts (0.5-2.0 HP)
Great for normal duty and soft-start operation
Control Mode: V/F control; Open-loop vector control
Carrier frequency up to 15KHz
Auto torque boost and auto slip compensation function
Built-in PID control
Modbus Communication (RS485 baud rate up to 19200bps)
Sleep/wake up function
KNC-VFD-FV100-2S
Input Voltage Range: Single-Phase, 200-240V
Rated Power: 750-1500 Watts (1-2 HP)
Great for normal duty and soft-start operation
Control Mode: V/F control; Open-loop vector control
Carrier frequency up to 15KHz
Auto torque boost and auto slip compensation function
Built-in PID control
Modbus Communication (RS485 baud rate up to 38400bps)
Sleep/wake up function
KNC-VFD-FV100-2T
Input Voltage Range: Three-Phase, 200-240V
Rated Power: 373-22370 Watts (0.5-30 HP)
Great for normal duty and soft-start operation
Control Mode: V/F control; Open-loop vector control
Carrier frequency up to 15KHz
Auto torque boost and auto slip compensation function
Built-in PID control
Modbus Communication (RS485 baud rate up to 38400bps)
Sleep/wake up function
KNC-VFD-FV20-2S
Input Voltage Range: Single-Phase, 200-240V
Rated Power: 400-2200 Watts (0.53-3.0 HP)
Frequency from 0 – 300Hz
Control Methods: V/F control, Sensorless Flux Vector Control, Closed-Loop Vector Control
Built-in EMI Filter and Brake Resistor
Modbus RTU or ASCII Protocol (RS485 baud rate up to 125000bps)
Supports Analog or Discrete Input Control, Communication Control, or Panel Control with Detachable Remote
KNC-VFD-FV20-2T
Input Voltage Range: Three-Phase, 200-240V
Rated Power: 0.4-22 kW (0.53-30.0 HP)
Frequency from 0 – 300Hz
Control Methods: V/F control, Sensorless Flux Vector Control, Closed-Loop Vector Control
Built-in EMI Filter and Brake Resistor
Modbus RTU or ASCII Protocol (RS485 baud rate up to 125000bps)
Supports Analog or Discrete Input Control, Communication Control, or Panel Control with Detachable Remote
.png)
.png)
.png)
.png)
.png)