Stepper Drivers with Pulse Generators | Anaheim Automation, Inc.
Information
Anaheim Automation's Stepper Motor Drivers with built-in Pulse Generators in three current ranges. These Stepper Drivers are offered in single-axis printed circuit board (PCB), enclosed modular, and Driver Pack styles. Our Stepper Driver Packs with built-in Pulse Generators employ the bilevel drive technique and include a matched power supply, while models like the MBC10P31 are economical microstep drivers with an integrated programmable pulse generator, and are packaged in a sheet metal enclosure. The printed circuit board and modular styles require an external power supply, which is purchased separately.
Current Range: 0.5 to 10.0 Amps
Bilevel and Microstep Drivers
PCB, Modular/Enclosed Packaging Styles
Offered as Single-Axis Units
Driver, Pulse Generator, and Power Supply Packages
Featured Series
DPD72PG1
Bilevel Step Motor Driver Pack with Linear Ramping Pulse Generator
Integrated 300 Watt Power Supply
10Amps/Phase Maximum Operating Current
7 Amps/Phase Standstill Motor Current
Adjustable Base and Max Speeds
Half-Step and Full-Step Operation
Bilevel Drive Operation
No RFI or EMI Problems
TTL/CMOS Compatible Inputs
Motor Turn-Off Input
DPS32PG1
Bilevel Step Motor Driver Pack with Linear Ramping Pulse Generator
100 Watt Transformer
110/200 V Operation
Short Circuit Protection, Open Motor Protection, Fault LED
5Amps/Phase Operating Current
3.5 Amps/Phase Output Current
Unipolar Operation
Half-Step and Full-Step Operation
Motor On/Off Input
Adjustable Base and Max Speeds
No RFI or EMI Problems
TTL/CMOS Compatible Inputs
+5VDC Power Supply Output
MBC10P31
Single-Axis Bipolar Driver with Pulse Generator
Output Current: 10.0A Peak
2000 Steps/Revolution
On-Board Programmable Pulse Generator with 2 Motion Profiles
Pulses from 1Hz to 50kHz
Directional Soft and Hard Limit Switch Inputs
Pulse Generator Clock Output
Busy Output
Motor On/Off Input and Automatic Current Reduction
Short Circuit Protection
MBC25P11
Microstep Driver with Pulse Generator
Output Current: 2.5A Peak
200 to 1600 Steps/Revolution (1, 2, 4, and 8 Selectable Step Operation)
Drives Two Motors in Series
On-Board Programmable Pulse Generator
Pulse from 77Hz to 15kHz
Directional Soft and Hard Limit Switch Inputs
Clock Output for Daisy Chaining
Busy Output
Motor On/Off Input and Automatic Current Reduction
Short Circuit Protection
MBC25PG1
Microstep Driver with Pulse Generator
Output Current: 2.5A Peak
200 to 1600 Steps/Revolution (1, 2, 4, and 8 Selectable Step Operation)
.png)
.png)
.png)
-(300x200).png)