.png)
The BLY17MDA Series is a compact construction that implements a DC Brushless controller and a DC Brushless motor in one streamline package. With the two parts combined into one casing, the need to wire up the motor has been eliminated. The high-speed DC Brushless motor can operate at 4000RPM and can generate up to 35 oz-in of torque. The DC Brushless controller operates off 24VDC with a maximum power output of 104 Watts. Using hall sensor feedback, the DC Brushless controller operates in a constant velocity mode.
Need to know the RPM of your motor? Check out our new SPDRO-4 speed readout module.
Keep your input voltage from rising too high due to internal mismatches while running your BLDC motor with our new PWR-24V/48V CLAMP active crowbar circuit.
- Requires 24VDC Input
- Constant Velocity Mode
- Screw-type Terminal Block
- 0-5V External Voltage Speed Control
- 2-Quadrant Operation
- Hall Sensor Feedback
- Short Circuit Protection
- Maximum Current Limit Setting at 10 Amps
- Run/Stop, Freewheel, and Direction Inputs
- Compact Size: 1.7" Square Motor Frame
- Improved Closed-Loop Control
.png)
.png)
.png)
.png)