MCTOOL

MCTOOL | Anaheim Automation, Inc.

Information

Anaheim Automation's reusable centering tools can be used to simplify the encoder installation process. Each centering tool is designed specifically to fit your Anaheim Automation encoder, aligning the base relative to the shaft, ensuring absolute accuracy. While centering tools are not required for installation, they are recommended when mounting screws are smaller than 4-40, or when position of the mounting holes is in question.

For instructions on how to install an encoder to a motor, see Anaheim Automation's Video Tutorials.

  • Bore Sizes from .059" to .276"
  • Suitable for Optical Encoders:
  • ENC-A4TS
  • ENC-A4TD
Loading...