Anaheim Automation's Kinco FD Servo Drives are rated for 50W to 1,500W output power and either 24-70VDC, 220VAC, or 176-253VAC input voltage. With a closed-loop tracking system to monitor mechanical movement, these industrial grade power modules produce higher startup torque than comparable models from competitors. With RS232, RS485, and CAN BUS Communication Ports, and the ability to switch between multiple control methods, operation is dynamic and adaptable.
For assistance with selecting the appropriate Servo Drive to match your project requirements, or to request a custom solution to meet specific OEM requirements, please contact our Customer Service Representatives. Compatible Servo Motors and Servo Accessories are available for separate purchase to complete your system.
Featured Series
KNC-SRV-FD114S
Position, Speed, and Torque Control
Rated Output Power: 50-100 W
Rated Voltage: 24-70 VDC
RS232 and RS485 Port
MODBUS RTU or Pulse and Direction
Supports Motors with Incremental or 16-Bit Absolute Encoders
Powerful Communication Software
Programmable Inputs and Outputs
CE Certified
KNC-SRV-FD124S
Position, Speed, and Torque Control
Rated Output Power: 200-400 W
Rated Voltage: 24-70 VDC
RS232 and RS485 Port
MODBUS RTU or Pulse and Direction
Supports Motors with Incremental or 16-Bit Absolute Encoders
Powerful Communication Software
Programmable Inputs and Outputs
CE Certified
KNC-SRV-FD134S
Position, Speed, and Torque Control
Rated Output Power: 750 W
Rated Voltage: 24-70 VDC
RS232 and RS485 Port
MODBUS RTU or Pulse and Direction
Supports Motors with Incremental or 16-Bit Absolute Encoders
Powerful Communication Software
Programmable Inputs and Outputs
CE Certified
KNC-SRV-FD144S
Position, Speed, and Torque Control
Rated Output Power: 1200-1500 W
Rated Voltage: 24-70 VDC
RS232 and RS485 Port
MODBUS RTU or Pulse and Direction
Supports Motors with Incremental or 16-Bit Absolute Encoders
Powerful Communication Software
Programmable Inputs and Outputs
CE Certified
KNC-SRV-FD412
Position, Speed, and Torque Control
Rated Output Power: 50-200 W
Rated Voltage: 24-70 VDC
RS232 and CAN BUS Port
MODBUS and CANopen Standard
Powerful Communication Software
Programmable Inputs and Outputs
CE Certified
KNC-SRV-FD422
Position, Speed, and Torque Control
Rated Output Power: 200-750 W
Rated Voltage: 176-253 VAC
RS232 and RS485 Port
MODBUS Protocol Standard
Powerful Communication Software
Programmable Inputs and Outputs
CE Certified
KNC-SRV-FD423
Supports Pulse + Direction (PLS + DIR), Forward and Reverse Pulse (CW/CCW), and A + B Phase
Position, Speed, and Torque Control
Rated Output Power: 400-750 W
Rated Voltage: 220 VAC
RS232, Modbus RS485, and CAN
Supports EASY TUNE Auto-Tuning
Provides Over-Current, Overheating, and Other Protective Measures
KNC-SRV-FD432
Position, Speed, and Torque Control
Rated Output Power: 1000-1260 W
Rated Voltage: 176-253 VAC Single or Three-Phase Input
RS232 and RS485 Port
MODBUS Communication Protocol
Powerful Communication Software
Programmable Inputs and Outputs
CE Certified
8 Item(s)
Showper page
Power Rating: 50W - 1,260W
Drive Control: Position, Speed, Torque
Communication: CANopen and MODBUS
Communication Interface: RS232, RS485, and CAN BUS
.png)
.png)
.png)
.png)
.png)
.png)
.png)
