Stepper Drivers with Preset Indexers | Anaheim Automation, Inc.
Information
Anaheim Automation manufactures Stepper Motor Drivers integrated with Manual Preset Indexers in both modular or Driver Packs packaging styles. This product line is offered in one or two-axis board-level models that can drive 2 and 4-phase stepper motors rated at 0.5 to 12.5 Amps per phase, model dependent. The Manual Preset Indexer can be operated manually or with a Programmable Logic Controller (PLC) to index a set of pulses determined by the internal count switches or an external count module.
Current Range: 0.5 to 12.5 Amps
High-Performance, Bilevel and Microstep Drivers
Offered as One or Two-Axis Units
Counter Modules Available Separately
Driver, Indexer and Power Supply Packages
Featured Series
DPD72451
Single-Axis Driver Pack with Built-In Manual Preset Indexer, Power Supply, and Cooling Fan
Drives 4-Phase Stepper Motors Rated for 1-7 Amps per Phase
Bilevel Drive Technique Prevents EMI, RFI, and Motor Overheating
Preset Indexer can be operated manually or via PLC
Functions: Home, Hard and Sift Limit Inputs, Two Homing Modes, Jog/Run, Fast Jog, and Switch-Selectable Base Speed, Max Speed, and Acceleration/Deceleration
DPF72452
Two-Axis Driver Pack with Built-In Manual Preset Indexer, Power Supply, and Cooling Fan
Drives 4-Phase Stepper Motors Rated for 1-7 Amps per Phase
Bilevel Drive Technique Prevents EMI, RFI, and Motor Overheating
Preset Indexer can be operated manually or via PLC
Functions: Home, Hard and Sift Limit Inputs, Two Homing Modes, Jog/Run, Fast Jog, and Switch-Selectable Base Speed, Max Speed, and Acceleration/Deceleration
DPFHP451
Internal Index Count Switches
Pulse Rates up to 14,792 pulses per second
Very High Motor Power Output
15 Amps/phase Maximum Operating Current
10 Amps/phase Standstill Motor Current
Dual Voltage Power Supply with 500 VA Transformer
Bilevel Drive (No RFI or EMI Problems)
Half-Step and Full-Step Operation
TTL/CMOS Compatible Inputs
CW and CCW Index Inputs
MBC10SI1
Output Current: 10.0A Peak
2000 Steps/Revolution
On-Board Programmable Simple Indexer with Two Motion Profiles
Pulses from 1Hz to 50kHz
Directional Soft and Hard Limit Switch Inputs
Complete Output
Busy Output
Motor On/Off Input and Automatic Current Reduction
Short Circuit Protection
MBC25SI1TB
Output Current: 2.5A Peak
200 to 1600 Steps/Revolution (1, 2, 4, and 8 Selectable Step Operation)
On-Board Programmable Simple Indexer with Four Motion Profiles
Pulses from 1Hz to 50kHz
Directional Soft and Hard Limit Switch Inputs
Clock Output for Daisy Chaining
Busy Output
Motor On/Off Input and Automatic Current Reduction
.png)
.png)
.png)