MBC05641
| Current Range (A) | 0.5 - 5.0 |
|---|---|
| Voltage Requirement | 24 - 48 VDC |
| Steps per Revolution | 200 - 12800 |
| Pulse Generator / Controller | - |
| Power Supply | PSA40V4A-1 |
Product Information
The MBC05641 Microstep Motor Driver has an output current capability of 0.5 Amps minimum to 5.0
Amps maximum (Peak Rating). The MBC05641 driver operates from a DC voltage of 24-48 Volts. The
inputs are optically isolated with a minimum sourcing of 7.0mA per input (+3.5VDC minimum to +24VDC
maximum). The clock input is set to receive either positive or negative edge clocks with a maximum
frequency of 400kHz. The MBC05641 driver offers direction control and motor current ON/OFF capabilities.
The Reduce Current Enabled automatically reduces motor current to 50% of set value after the last
step is made (1sec delay). The driver has built-in features to indicate power on (Green LED), clocks being
received (Yellow LED), and fault conditions (Red LED). A power supply is required and must be purchased seperately.
See Accessories on this website for driver adders, such as shielded motor cables, connectors, and power supply options. For compatible high-torque stepper motors, consider our popular 23Y, 24Y, 34Y and 42Y series.
- Output Current 5.0 Amps Peak
- 200 to 12,800 steps/rev (1,2,5,10,16,32 and 64 selectable step operations
- Short Circuit Protection
- Size: 5.4"L x 1.868"W x 3.36"H
- No Minimum Inductance
- Optical Isolation
- Motor On/Off Input
- RoHS Compliant
.png)
.png)